| Rated Power | 16kw |
| Running Power | 8kw/h |
| Raw Material | Carbon granule and Binder |
| Capacity | 1500PCS/24H base on 2.5*10inch |
| Inner diameter | 30mm default |
| Outside diameter | 62mm default |
| Range of diameter | Inner diameter:7-100mm Outside diameter:15-150mm |
| Length of CTO | 5” 10” 20” 30”...customize according to request |
|
Remark |
One machine just do one size inner and outside diameter If need another size,should replace barrel and screw |
Mixer: Mixing Activated carbon granules and Binder powder
Vacuum feeder: Own design Vacuum feeder and second time mixing,Feeder material into extruder no carbon dust blowing
Extruder: Melt mixed carbon granule and binder powder,melt binder and extrude into carbon cartridge,Screw shaft and barrel decide cartridge inner diameter and outside diameter
Chiller: Recycle water inside,set different cooling water temperature to cooling hot cartridge,hard carbon cartridge strength
Vacuum cutter: Cut carbon cartridge different length,like 10inch,20inch
